Glambot mode (slow-motion video with a robot arm) supports the following robot arms: Dobot Nova 5, KUKA LBR iiwa and, in 3.10.0 and later, Fairino FR5. Glambot is available only on the Ultimate AI plan. Robot arms other than these are not supported.
The Robot Selection list on the Glambot page contains only Dobot Nova 5, KUKA LBR iiwa and (3.10.0 and later) Fairino FR5; no other robot can be selected. The following do NOT work as Glambot: Fairino models other than the FR5 (including the FR10), Universal Robots (UR series), FANUC, ABB, UFACTORY xArm, Elephant Robotics, Dobot models other than the Nova 5, KUKA models other than the LBR iiwa, and other ready-made robot arms sold under the name 'glambot'.
Even if the manufacturer says the robot is compatible with the Dobot Nova 5, we have not tested it and cannot say it will work. Before buying a robot, choose one of the models on the list.
3.10.0 and later: Fairino FR5 can be selected. When you select the FR5, the Network setup (Fairino FR5) note appears on the settings screen: 'Connect the FR5 controller to this computer with an Ethernet cable, then give the network adapter a static address in the same network, for example IP 192.168.58.10, subnet mask 255.255.255.0.' The FR5 uses its own motion tables and the camera points at a fixed spot: the guest should stand about 1.3 m in front of the robot, slightly to its right. On this robot the motion points and axis offsets cannot be edited yet; the speed setting does apply. If the camera cannot point at the guest, the robot does not move and shows 'The robot did not move: the camera cannot look at the guest from this position. …'; move the guest a little to the right or closer to the robot.
3.6.0 and later: KUKA LBR iiwa can be selected. In 3.5.4 and earlier only the Dobot Nova 5 is supported; the warning on the screen appears as Dobot Nova 5 is required to use Glambot.
Which plan unlocks it?
Glambot is exclusive to the Ultimate AI plan. It is locked on Starter, Pro AI and the trial: the GlamBot card shows the Ultimate badge, tapping the card opens the Ultimate plan only window, and you can upgrade the plan with Upgrade to Ultimate AI.
Where are the settings?
Event Settings → Event Mode → GlamBot → Glambot in the left menu
When you select the GlamBot card on the Event Settings → Event Mode tab, the Glambot page appears in the left menu; there you choose the robot from the Robot Selection list and enter the robot's IP address in the Connection Settings section. Details: the Event Settings, How to Use the Event Mode Tab article.
What can I do if my robot is not supported?
You can run an unsupported robot separately with its own software and record a normal video in the app. In this case the app does not control the robot; the motion and the capture are not linked to each other, and this setup does not count as Glambot mode.
If you don't have a robot arm and only want a moving-video look, have a look at Photo to AI Video: no robot is needed, it spends credits (see How to Create Custom AI Video?).
If you want support for another robot, write to us via live chat. A new robot can only be added after testing with that robot.
Related topics
Event Settings, How to Use the Event Mode Tab How to Create an Event? How to Create Custom AI Video?