Configuration for the Glambot robotic camera arm. This page appears in the sidebar only when the event's booth mode is Glambot.
Connecting and testing the robot
- Robot Selection — choose the robot model.
- Connection Settings — enter the robot's IP address (four octets) and monitor the live connection status.
- Test Robot — once connected: Move to Zero Pose, Packing Pose, Camera Installation Pose and Test Zoom-In.
- Capture Settings — timing offsets for the movement (like a start-time offset).
!
You must be in Glambot mode to see this
If the page is missing, first set the event's Booth Mode to Glambot in the Event Mode tab. Remember that choosing Glambot also turns the booth into hands-free video (Photo off, Video on, Auto-Trigger on).
</>
Behind the scenes
The IP octets are stored individually; robot movement runs through the robotics service. Use the test poses to verify the arm reaches its positions safely before any guest gets near.
